Dieser Befehl setzt die Gerätesoftware zurück.
Befehlsformat für ASCII und NMEA 0183:
aXZ<cr><lf>
Befehlsformat für SDI-12:
aXZ!
a | Geräteadresse |
XZ | Zurücksetzungsbefehl |
<cr><lf> | Befehlsabschluss für ASCII und NMEA 0183 |
! | Befehlsabschlusszeichen für SDI-12 |
Die Antwort hängt vom Kommunikationsprotokoll ab (siehe die Beispiele).
Beispiel (ASCII):
0XZ<cr><lf>
0TX,Start-up<cr><lf>
Beispiel (SDI-12):
0XZ!0<cr><lf> (=device address)
Beispiel (NMEA 0183):
0XZ<cr><lf>
$WITXT,01,01,07,Start-up*29