Error codes in MI70 Handheld Meter - HMP110 - HMP113 - HMP60 - HMP63 - MI70

HMP60 and HMP110 Series User Guide

Document code: M211060EN
Revision: L
Language: English
Product: HMP110; HMP113; HMP60; HMP63
Document type: User guide

Table 1. Error codes in MI70
If several errors are active at the same time, the MI70 shows the sum of currently active error codes. The label "_hex" might not be displayed in MI70.

Refer to Error messages in Insight software for more information about the error states.
Transmitter error code in MI70	Corresponding error
1_hex	Temperature measurement error. [44]
2_hex	Humidity measurement error. [45]
4_hex	Humidity sensor failure. [46]
8_hex	Capacitance reference error. [47]
10_hex	Ambient temperature out of range. [48]
20_hex	Firmware checksum mismatch. [49]
40_hex	Device settings corrupted. [50]
80_hex	Additional configuration settings corrupted. [51]
100_hex	Sensor coefficients corrupted. [52]
200_hex	Main configuration settings corrupted. [53]
800_hex	Supply voltage out of range. [55]
2000_hex	Non-volatile memory read/write failure. [57]
4000_hex	Calibration certificate checksum mismatch. [58]