All HMP60 series probes and HMP110 series probes, with the exception of the HMP110REF reference probe, can be ordered with analog output channels. Probes that use analog output can also use the RS-485 interface for temporary service access (Vaisala Industrial Protocol serial line commands) and Modbus RTU communication.
For installations where permanent digital output is required, the HMP110 model can be ordered as a digital-only probe (select either Modbus, RS-485 or Interface for Vaisala devices (VDIGI) as the output when ordering).
All HMP60 series and HMP110 series probes can also be connected temporarily to Insight PC software with a Vaisala USB cable for configuration, calibration and adjustment, and monitoring.
|When you order HMP110 as a digital probe, analog output channels are not available.|
Analog output options
Digital output options
|For installations where permanent digital output is required, select the digital-only HMP110 model (digital output with Modbus, RS-485, or Interface for Vaisala devices (VDIGI), selected when ordering). The digital output options in other probe models are intended for temporary use.|
|RS-485 digital output||Temporary service access only||Yes||Temporary service access only|
|Temporary Insight PC software configuration access with accessory USB cable||Yes||Yes||Yes||Yes||Yes||Yes||Yes|