Use the SERI command to show or set the serial line settings. The new settings will be taken into use when the probe is reset or powered up.
SERI [b p d s]
Syntax | Description |
---|---|
b | baud rate (300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600) |
p | parity (n = none, e = even, o = odd) |
d | data bits (7 or 8) |
s | stop bits (1 or 2) |
Example (shows default settings):
seri
Baud P D S : 19200 N 8 1