Extend analog output range - HMP110 - HMP113 - HMP60 - HMP63

HMP60 and HMP110 Series User Guide

Document code
M211060EN
Revision
L
Language
English
Product
HMP110
HMP113
HMP60
HMP63
Document type
User guide

Use the AOVER command to allow the analog output channels to exceed their specified range by 10 %. The scaling of the parameter remains as before; the extra range is used for additional measurement range in the wet end. This command is not in use in the digital-only HMP110 probe option.

AOVER [ON/OFF]<cr>

The following example illustrates how the analog output is affected. Channel 1 outputs Td with voltage output 0 … 5 V (−40 °C … +60 °C). After giving the AOVER ON command, the range is 0 … 5.5 V (−40 °C … +70 °C). Note that the +60 °C T d point is still at 5 V.

Example:

aover on
AOVER               :       ON