|
Information on spare parts, accessories, and calibration products is available online at www.vaisala.com and store.vaisala.com. |
| Item | Item code |
|---|---|
| Sensors | |
| For HMP60 and HMP63: | |
| Vaisala INTERCAP® sensor, 1 pc | 15778HM |
| Vaisala INTERCAP® sensor, 10 pcs | INTERCAPSET-10PCS |
| For HMP110 and HMP113: | |
| Vaisala HUMICAP® 180R | HUMICAP180R |
| Vaisala HUMICAP® 180V | HUMICAP180V |
| Sensor protection | |
| For HMP60 and HMP110: | |
| Plastic grid filter | DRW010522SP |
| Membrane filter | DRW010525SP |
| Stainless steel sintered filter | HM46670SP |
| PTFE membrane filter with stainless steel grid | ASM212652SP |
| PTFE sintered filter | DRW244938SP |
| For HMP63 and HMP113: | |
| Plastic grid filter | DRW240185SP |
| Plastic grid with membrane filter | ASM210856SP |
| Stainless steel sintered filter | HM47280SP |
| Porous PTFE filter | 219452SP |
| Probe installation | |
| For HMP60, HMP110, and HMP110T: | |
| Duct installation kit | 215619 |
| For HMP60 and HMP110: | |
| Probe mounting clamp set, 10 pcs | 226067 |
| Probe mounting flange | 226061 |
| Probe holder, 5 pcs | ASM213382SP |
| Plastic M12 installation nuts, 1 pair | 18350SP |
| Flat extension cable 1 m (3 ft) 1 | CBL210649SP |
| For HMP63 and HMP113: | |
| Probe mounting clamp set, 10 pcs | 226067 |
| Probe mounting flange | 226061 |
| Probe holder, 5 pcs | ASM213382SP |
| Plastic locking bushing (3 pcs) for attaching the probe to HM40 indicator | DRW238590SP |
| Connection adapters 2 | |
| 4 … 20 mA loop power converter | UI-CONVERTER-1CB |
| Mounting bracket for converter | 225979 |
| USB cable for PC connection | 219690 |
| Connection cable for MI70 indicator | 219980SP |
| Connection cables with open wires | |
| +60 °C 0.3 m (+140 °F 1 ft) | HMP50Z032SP |
| +60 °C 1.2 m (+140 °F 4 ft) | HMP50Z120 |
| +60 °C 3 m (+140 °F 9.8 ft) | HMP50Z300SP |
| +80 °C 1.5 m (+176 °F 5 ft) | 225777SP |
| +80 °C 3 m (+176 °F 10 ft) | 225229SP |
| +180 °C 1.5 m (+356 °F 5 ft) FEP | 238025 |
| +180 °C 3 m (+356 °F 10 ft) FEP | 226902SP |
1 Connection cable 219980SP is also needed if this cable is used with MI70 indicator.
2 No separate adapter is needed for HM40 compatibility.