Figure 1. Insight software main menu view with HMP110 1 Select to access Insight main menu. Configure Device: probe options and general settings. Export Settings: creates a text file export of the device settings. Calibrate: options for calibrating and adjusting the measurement of the probe, viewing adjustment data, and restoring factory adjustments. Probe reset quick selection. About Device: general device information such as serial number and software version. 2 Select Settings to switch between the Basic Mode and Advanced Mode user modes, change the units of parameters (metric/non-metric), enter a factory code to access restricted functionalities, or view information about the Insight software. 3 Monitoring provides options for monitoring and recording selected parameters, and exporting the monitoring data as a CSV (comma-separated values) file. 4 Device information menu with the following tabs: Measurements: measurement graph view with parameter drop-down selection. Calibration information: read-only information about the latest stored calibration. Diagnostics: troubleshooting and administrative information about the device status. Also includes options for exporting the device error log and other diagnostics information as files (CSV/ZIP). When contacting Vaisala support, it is recommended to include an up-to-date export of the error log with the support request.