Probe mounting clamp - HMP110 - HMP113 - HMP60 - HMP63

HMP60 and HMP110 Series User Guide
Document code
M211060EN
Revision
L
Language
English
Product
HMP110
HMP113
HMP60
HMP63
Document type
User guide
Figure 1. Probe mounting clamp in use. The optional mounting clamp makes it easy to install the probe on the wall of the measurement environment. The probe can be detached for calibration simply by loosening the lower screw.

The probe mounting clamp is delivered in 2 parts that must be connected when it is used:

  1. Align the slots on the clamp parts.
  2. Slide the lower clamp part over to the bottom end of the upper part.
  3. Place the clamp to the intended location and secure the upper clamp part with a screw.
  4. Place the probe in the clamp.
  5. Tighten the lower clamp part with a screw.