Configuring common settings - AWS310 - AWS310-SITE - MAWS201 - AWS430

AWS Client User Guide

Document code
M210932EN
Revision
F
Language
English
Product
AWS310
AWS310-SITE
MAWS201
AWS430
Document type
User guide
  1. In AWS Client, select Settings > Address Book.
  2. In the Address Book window, select New.
  3. In Common, set the following:
    Name
    Type an alphanumeric string that uniquely identifies the connection that you create in the address book.
    Station id
    If you have only one weather station in the network, you can leave the field blank. If you have multiple weather stations in the same network, and you are going to access them over the same connection, type an alphanumeric string that uniquely identifies the station for which you are creating an address book entry.
    Command wait timeout (ms)
    Type a value in milliseconds that specifies how long AWS Client waits for the QML data logger to respond when AWS Client sends a request over the connection. The value should be at least 20000 ms (20 s).
    If the request, for instance, a log file download, succeeds within the timeout, a success message is displayed. If the request fails, a failure message is displayed instead, and you can try again at a later time.
    Factors such as the current load on the QML data logger, delays in the connection, and the response length affect whether or not the timeout expires during a request.
    Application
    The StationView application is used for configuring GOES communication settings. For more information, see Vaisala GOES DCP Transmitter QST102-3 Technical Reference.
  4. Configure the connection type.