For each manual sensor included in your
setup, you can view and configure information on the sensor’s status, the type of values for
which the sensor is used, and the range of valid values for the sensor.
In AWS Client, select Settings > Manual Sensors.
Select the sensor from the list.
Set the following:
Entry
Name of the manual sensor as configured in the QML data logger
setup.
Value
Value for the manual sensor reading.
Type
Data type of the reading as configured in the QML data logger
setup.
Integer
Float
Text
Status
Status of the sensor as reported by the QML data logger.
Minimum value
Minimum accepted value as configured in the QML data logger
setup.
Maximum value
Maximum accepted value as configured in the QML data logger
setup.
Unit
Unit for the value.
To configure a manual sensor, select Edit.
In Value, type a value for the manual sensor reading.
The values you enter for
the manual sensors must match the configured data type: Integer, Float, or Text. The Save button is disabled if the entered value is not of the correct type.
