| Item | Quantity |
|---|---|
| Mast tube 1 | 1 |
| Joining element | 2 |
| Mast tube 2 | 1 |
| Mast tube 3 | 1 |
| Aluminum top section | 1 |
| Hex screw ISO4762 M8×20 | 15 |
| Set screw DIN913 M8×20 | 2 |
| Washer DIN125 B8.4 | 15 |
| Washer DIN125 A21 | 9 |
| Thin hex nut ISO4035 M20 | 6 |
| Grounding connector | 1 |
| Attachment plate for grounding connector | 1 |
| Hex screw M6×30 DIN912 A4 | 2 |
| Washer M8 DIN125 A4 | 2 |
| Item | Quantity |
|---|---|
| Foundation bolt | 6 |
| Hex nut ISO4032 M20 | 18 |
| Lifting eye nut DIN582 M20 | 3 |
| Template for positioning foundation bolts | 1 |
| Item | Quantity |
|---|---|
| Wedge clamp for guy wire (SH49) | 3 |
| D‑shackle 10 mm (0.39 in) A4 | 6 |
| Guy rod, white 1500 mm (59.06 in) | 9 |
| Guy rod, red 1500 mm (59.06 in) | 9 |
| Chain link connector | 15 |
| Guy wire with thimble | 3 |
| Guy rod flange | 1 |
| Item | Quantity |
|---|---|
| Wedge clamp for guy wire (SH49) | 3 |
| D‑shackle 10 mm (0.39 in) A4 | 6 |
| Guy rod, white 1500 mm (59.06 in) | 6 |
| Guy rod, red 1500 mm (59.06 in) | 6 |
| Chain link connector | 9 |
| Steel wire with thimble | 3 |
| Guy rod flange | 1 |
| Item | Quantity |
|---|---|
| Air terminal, aluminum bar D15 mm | 1 |
| Air terminal bracket | 2 |
| Hex screw M6×45 DIN933 A4 | 9 |
| Spring washer B6 DIN127 A4 | 9 |
| Hex nut M6 DIN934 A4 | 9 |
| Flat washer A6,4 DIN125 A4 | 18 |
| Parallel groove connector | 1 |
| Split pin M4×28 DIN94 A4 | 1 |
| Down conductor, aluminum wire 50 mm2 20kV L11 m, black | 1 |
| Cable ties 5 × 400 mm, black | 30 |
| Item | Quantity |
|---|---|
| Lifting rod | 1 |
| Hoisting belt 1 | 1 |
| Wire rope winch with steel wire | 1 |
1 The hoisting belt is not
needed if you install the winch as instructed in this document.