| Wear protective eyewear, gloves, and a safety helmet. |
| To protect your hands, always wear gloves when handling the guy wires. |
| WARNING Make sure your clothing and equipment do not get tangled in the
wires or equipment during installation. |
In assembling guy wires, you need:
- Guy wire
with thimble (3 pcs)
- Wedge clamp for guy wire (SH49)
(3 pcs) (if you use additional middle guy wires, 6 pcs)
Attach the guy wires with the wedge clamps
to the guy wire foundations.
-
Connect the U‑bolt to the lifting eye nut that is installed on the concrete
foundation.
-
Slide the strap onto the U‑bolt and thread the nuts.
- 1
- U‑bolt nuts
- 2
- Strap
- 3
- U‑bolt
-
Push the guy wire through the strap and slide the wedge on the guy wire.
- 1
- Guy wire
- 2
- Wedge
-
Push the wedge to the strap and hammer it in tightly. Check that the wire is
pre-tensioned.
- 1
- Strap
- 2
- Wedge
-
To secure the wedge, tighten the wedge adjustment screw.