Repair painting - DKE110F

DKE110F User Guide

Document code
Document type
User guide

The repair paint kit is available from the mast manufacturer Exel.

  • Acetone
  • Brush, width approximately 20 … 50 mm (0.78 … 1.96 in)
  • Paper or cloth towel
  • Sand paper: fine, grit size 200 … 400
  • Tape, polypropylene, PP
  • Two-component polyurethane paint, signal red RAL 3001 and traffic white RAL 9016 (valid only for the coloring that complies with ICAO standards)
  • Wooden or plastic mixing stick
Wear protective clothing, eyewear, and gloves.
Wear respiratory protection.
WARNING Read and follow the mast manufacturer safety instructions.
WARNING Acetone is flammable. Make sure that there is good ventilation and avoid skin contact during repair and painting.
Read and follow the instructions of the paint manufacturer on painting conditions.
The recommended temperature during the painting work is at least +18 °C (+64 °F).
  1. Clean all surfaces with sand paper.
  2. Remove dust with acetone and paper or towel.
  3. Mix the paint carefully. Follow the paint manufacturer instructions.
  4. Brush the paint on the clean surface.
  5. Let the paint dry.