Mounting support arm DKE110FSUP1 - DKE110F

DKE110F User Guide
Document code
M211788EN
Revision
F
Language
English
Product
DKE110F
Document type
User guide
5‑mm Allen key

DKE110FSUP1 is used with frangible 106‑mm (4.17‑in) pole masts (DKE100 masts).

Figure 1. DKE110FSUP1 installation accessories
1
Mounting plate (META00253)
2
Mounting kit (APPK‑SET106)
3
Support arm (10391)
  1. Attach the mounting kit to the mounting plate. Tightening torque 5 Nm.
    1
    Mounting plate
    2
    Flat washer A6 DIN125 (4 pcs)
    3
    Spring washer A6 DIN127 A4 (4 pcs)
    4
    Hex screw M6×30 DIN912 (4 pcs)
  2. Attach the mounting kit to the pole mast. Tightening torque 5 Nm.
    1
    Mounting plate
    2
    Round sleeve spacer M6, D10/6.4 L10, AISI304 (4 pcs)
    3
    Flat washer A6 DIN125 (4 pcs)
    4
    Spring washer A6 DIN127 A4 (4 pcs)
    5
    Hex screw M6×30 DIN912 (4 pcs)
    6
    Clamp
  3. Attach the support arm to the mounting plate. Tightening torque 5 Nm.
    1
    Flat washer A6.4 DIN125 (3 pcs)
    2
    Spring washer B6 DIN127 (3 pcs)
    3
    Hex screw M6×16 DIN912 (3 pcs)
  4. Use a spirit level to verify that the support arm is level.
Figure 2. DKE110FSUP1 installed