Replacing window blower - CL61

CL61 User Guide
Document code
M212475EN
Revision
E
Language
English
Product
CL61
Document type
User guide
  • Socket wrench

Make sure that you have the replacement spare part available.

  1. Switch off AC (mains) power.
    WARNING To make sure that there is no AC (mains) power available for the system, disconnect the AC (mains) cable (AC in).
    1
    AC (mains) power switch
    2
    AC (mains) power cable connector AC in
  2. Disconnect the blower cable from the window blower port (CLB611) at the bottom of the interface unit.
  3. Remove the nuts and washers.
    1
    Window blower port CLB611
    2
    Nut (2 pcs)
    3
    Washer (2 pcs)
    4
    Blower cable
  4. Pull at the blower and lift it up slightly, and remove the blower with its cable.
  5. Route the blower cable of the replacement blower down towards port CLB611 at the bottom of the interface unit.
    1
    Blower cable
  6. Attach the replacement blower with nuts and washers.
  7. Connect the blower cable to port CLB611.
  8. Connect the power.