Configuring location information

Configuring location information - CL61

CL61 User Guide

Document code

M212475EN

Revision

Language

English

Product

CL61

Document type

User guide

Laptop
Maintenance cable

When starting to use CL61, define the device identifier and device location information. This information helps to distinguish several devices from each other and provides metadata for the measurements.

The following table lists the configurable unit metadata settings. Use the settings that are suitable for you.

Table 1. Unit metadata
Parameter	Description	Value / Range	set
cl.unit.alias1	Alias name 1	Freeform text	1
cl.unit.latitude	Latitude Unit: degrees	−90.000000 … 90.000000	1
cl.unit.longitude	Longitude Unit: degrees	−180.000000 ... 180.000000	1
cl.unit.altitude	Altitude Unit: meters Resolution: full meters Use negative values (−) for values below sea level.	−999 ... 9999	1
cl.unit.azimuthangle	Measurement azimuth angle Reference direction: north Unit: degrees	0 ... 360	1

Establish a maintenance connection to the device.
Change the user level.
```
level 1
```
Configure the device identifier.
```
set cl.unit.alias1 <alias>
```
To set the device location, type the latitude, longitude, and altitude information.
```
set cl.unit.latitude <latitude>
```
```
set cl.unit.longitude <longitude>
```
- For latitude the range is −90.0000 ... 90.0000.
- For longitude the range is −180.0000 ... 180.0000.
```
set cl.unit.altitude <altitude>
```
For altitude, the resolution is full meters. Use negative value (−) for values below sea level.

Set the azimuth angle.

set cl.unit.azimuthangle <azimuth angle>