Connecting probes to Indigo500 series transmitters - HMP1 - HMP3 - HMP4 - HMP5 - HMP7 - HMP8 - HMP9 - HMPX - INDIGO520 - MMP8 - MMPX - TMP1 - TMPX

HMP Series with MMP8 and TMP1 User Guide
Document code
M212022EN
Revision
K
Language
English
Product
HMP1
HMP3
HMP4
HMP5
HMP7
HMP8
HMP9
HMPX
MMP8
MMPX
TMP1
TMPX
Document type
User guide
CAUTION The IP classification of probes is valid only when the probes are connected to the probe connection cable.
If your transmitter was delivered with preconfigured analog outputs, make sure that you connect the measurement devices accordingly.
Figure 1. Connecting probes to Indigo500 transmitter.

Probes are connected to Indigo500 series transmitters using a cable. Connections are made to the screw terminals inside the housing. The Indigo520 model allows 2 probes to be connected. After connecting a probe, use the touchscreen interface or the web user interface to configure the transmitter.

1
Probe connection cable for probe 1
2
Probe connection cable for probe 2 (dual-device support in Indigo520)
3
Probe to be connected as probe 2 (GMP252 example)
4
Probe to be connected as probe 1 (HMP7 example)
5
Probe cable connector (M12 5-pin A-coded female)