Configuring minimum and maximum RH and T errors with Insight - HMD60 - HMD62 - SWINSIGHT10 - TMD60 - TMD62

HMD62 TMD62 User Guide
Document code
M212016EN
Revision
D
Language
English
Product
HMD60
HMD62
TMD60
TMD62
Document type
User guide

You can define the minimum and maximum limit that the RH (HMD62 only) or T measurement output can reach before the output moves to error state.

Note that configuring these settings requires using Insight in Advanced Mode.
Figure 1. Minimum/maximum allowed measurement value before error (HMD62 example)
To define the minimum/maximum error limits:
  1. Switch to Advanced Mode in the Settings menu.
  2. Select > Configure Device > Advanced.
  3. Enter the values for minimum and maximum RH and T as applicable, select Save and exit the menu with Close.