- 1
- Captive screw (2 pcs, crosshead) for attaching the lid of the transmitter.
- 2
- Screw (2 pcs) for mounting the transmitter on the installation surface.
- 3
- Transmitter lid. Open the captive screws of the lid to access input and output electronics.
- 4
- Transmitter base. Contains the input and output connectors on the transmitter board: see Transmitter board.
- 5
- Cable gland (M16×1.5 lead-through) for leading wires into the transmitter.
- 6
- Alternative lead-through (M20×1.5) for wiring.
- 7
- Probe body. Long (shown) and short probe options available: see Transmitter dimensions.
- 8
- Probe filter: see Filter options for available options.
- 9
- HUMICAP® sensor inside the probe filter.
| CAUTION Do not touch the sensor element. |