Device information and status - GMP252

GMP252 User Guide
Document code
M211897EN
Revision
E
Language
English
Product
GMP252
Document type
User guide
Table 1. ? command
Syntax Description
?<cr> Show listing of device information.
??<cr> Show listing of device information even if device is in poll mode and connection has not been opened using the open command.
Example:
?
Device : GMP25x
Copyright : Copyright (c) Vaisala Oyj 2016. All rights
reserved.
SW Name : GMP25x
SW version : 1.0.0
SNUM : GMP233_5_18
SSNUM : S1234567
CBNUM : c1234567
Calibrated : 20160504 @ Vaisala/R&D
Address : 0
Smode : STOP
Table 2. errs command
Syntax Description
errs<cr> Show active error(s). For a list of possible errors and their remedies, see Error messages.

Example (no active errors):

errs
NO CRITICAL ERRORS
NO ERRORS
NO WARNINGS
STATUS NORMAL
Table 3. help command
Syntax Description
help<cr> Show list of currently available serial commands.

Example (showing a list of the basic commands):

help
ADATE
ADDR
ATEXT
CLOSE
ENV
ERRS
FORM
HELP
INTV
PASS
RR
ESET
RX
SDELAY
SEND
SENDX
SERI
SMODE
SNUM
SYSTEM
UNIQID
TIME
VERS
Table 4. snum command
Syntax Description
snum<cr> Show serial number of the probe.

Example:

snum
SNUM : M0220028
Table 5. system command
Syntax Description
system<cr> Show probe firmware information.

Example:

system
Device Name : GMP25x
SW Name : GMP25x
SW version : 1.0.0
Operating system : TSFOS1.0
Table 6. time command
Syntax Description
time<cr> Show how long the probe has been in operation since the last startup or reset.

The operation counter is in format hh:mm:ss.
Example:
time
Time : 01:41:24
Table 7. vers command
Syntax Description
vers<cr> Show firmware version of the probe.
Example:
vers
SW version : 1.0.0