M211897EN-E |
July 2023 |
This manual.
- Added information on using the GMP252
probe with the Indigo80 handheld indicator.
- References to Indigo200 transmitters'
wireless configuration interface replaced with information about
the new Indigo200 transmitters that have a USB-C interface. For
instructions on configuring GMP252 probes with the earlier
wireless configuration interface, see GMP252 User Guide
revision M211897EN-E, available at docs.vaisala.com.
- Added sections ASM213582 probe holder and GMP252 probe handle accessories.
- Updated sections:
- Removed section Patent
notice.
|
M211897EN-D |
March 2018 |
Previous version.
- Added information about using the probe with Vaisala Insight PC software.
- PuTTy terminal settings instructions updated.
- Calibration uncertainty specification updated.
- DTR250A radiation shield pole mounting kit added.
- Added recommendation to disable MI70 indicator's automatic power off feature when used with GMP252.
- Updated instructions on using MI70 to configure environmental compensations.
- Default device address in serial line communication corrected (240).
- Corrected the unit information of sdelay command.
- Added a note about maximum voltage output to analog error state output configuration.
- Information on Modbus register numbers updated.
|
M211897EN-C |
June 2017 |
- Added information about using the probe with Vaisala Indigo transmitters.
- Added flow-through adapter accessory
ASM212011SP, spray shield accessory ASM212017SP, and radiation
shield accessory DTR250.
- Modbus status register information updated.
- Calibration adapter order code corrected.
|