Figure 1. Insight software main menu view with
transmitter and connected probe
1
Select to access Insight main menu.
Configure device: display and graph options, output and relay settings (if applicable), parameter
and unit selection, environmental compensation settings, filtering factor, probe
options, and general settings.
Export settings: creates a text file export of the device settings.
Calibrate: options for calibrating and adjusting the measurement of the connected probe,
adjusting outputs, viewing adjustment data, and restoring factory adjustments.
Various reset, factory default
settings, and restart options for transmitter and probe.
About
device: general device information such as serial number and software version.
2
Select Settings to switch between the Basic
mode and Advanced mode user modes, change the units of parameters (metric/non-metric), enter a factory code
to access restricted functionalities, or view information about the Insight software.
3
Monitoring provides options for monitoring and recording selected parameters, and exporting the
monitoring data as a CSV (comma-separated values) file.
4
Device information menu with the following tabs:
Measurements: measurement graph view with parameter drop-down selection.
Calibration information: read-only information about the latest stored calibration.
Diagnostics: troubleshooting and administrative information about the device status. Also
includes options for exporting the device error log and other diagnostics
information as files (CSV/ZIP). When contacting Vaisala support, it is recommended
to include an up-to-date export of the error log with the support request.
