You can use the Indigo80 handheld
indicator to select which measurement parameters from the probe connected to the transmitter
are shown on the transmitter display.
Connect the transmitter to the indicator.
Open the
main menu by pressing .
Select Devices. If you have more than one device connected to the indicator, make a further selection
between the devices.
In this case, select Indigo300.
Select Settings.
Select Displayed parameters.
In Display parameter 1, 2, and/or 3, select the desired
parameter.
The selectable parameters depend on the
probe.
Exit the menu
by pressing or return to the main menu by pressing .
.
or return to the main menu by pressing