Transmitter parts - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
A
Language
English
Product
INDIGO300
Document type
User guide
Figure 1. Indigo300 transmitter parts
1
Display
2
Push button for transmitter display navigation
3
LED status indicator. Lights up when the display is turned off.
4
Locking wheel with a connector for probe or probe cable. Alternatively, this lead-through can be ordered with a fixed cable and M16×1.5 cable gland pre-installed.
5
Lead-through for cables. Plugged, or equipped with a M16×1.5 cable gland or an NPT 1/2" conduit fitting.
6
Lead-through for cables. Plugged, or equipped with a M20×1.5 cable gland or an NPT 1/2" conduit fitting.
7
Grounding terminal
8
Service port for connection to Insight PC software or Indigo80 handheld indicator
9
Rubber lead-through for cables, at the back
10
Transmitter base: mounting base and screw terminals for cables
11
Top cover: display and circuit board

The lead-through options (locking wheel, cable glands, conduit fittings, and plugs) are selected when ordering the transmitter.