Selecting displayed units - INDIGO300

Indigo300 User Guide

Document code
M212849EN
Revision
A
Language
English
Product
INDIGO300
Document type
User guide

You can use the Indigo80 handheld indicator to change the units of the measurement parameters shown on the transmitter display.

The unit selection has an effect on entering configuration values (for example, whether you must enter analog output scale settings as ppm or % values).
  1. Connect the transmitter to the indicator.
  2. Open the main menu by pressing .
  3. Select Devices. If you have more than one device connected to the indicator, make a further selection between the devices.

    In this case, select Indigo300.

  4. Select Settings.
  5. Select Displayed units.
  6. Select the unit you want to use for each parameter.
  7. Exit the menu by pressing or return to the main menu by pressing .