Powering - WID512

WID512 User Guide

Document code
Document type
User guide

After all the installation steps, connect the power source.

When the power supply is connected, the display is ready for operation. The device does not have a power switch.

The display is protected from overvoltage and undervoltage.

When using the power supply, take the following into account:

  • The power supply is intended for indoor use only. Make sure the selected power supply is suitable for your operating needs.
  • The negative side of the DC output is solidly connected to the protective earth (PE) conductor of the supplying AC network.

During device power-up the red LED indicator behind the front cover blinks. When the application starts, the LEDs turn off automatically.

As soon as the display is powered, the screen lights up and the display starts to collect, process, and show data according to the preset configuration. If the software configuration is not correct for your needs, edit the configuration.