Fixed probe model - HMT140

HMT140 User Guide
Document code
M211488EN
Revision
J
ft:locale
en-US
Product
HMT140
Document type
User guide

To remove and replace a fixed probe:

  1. Loosen the metal locking bushing by carefully turning it counterclockwise.
  2. Remove the probe from HMT140 by pulling it gently outwards.
  3. Attach the new probe to the 4-pin M8 panel connector on HMT140 (only 1 position possible).
  4. Tighten the locking bushing to the M8 panel connector by turning it clockwise.
    Figure 1. Fixed probe model
    1
    Holder bushing (attached permanently to the probe)
    2
    HMP110 probe
    3
    Locking bushing