| Property | Description/Value |
|---|---|
| Relative humidity | |
| Measurement range | 0 … 100 %RH |
| Accuracy: 1 | |
| At temperature range 0 … +40 °C (+32 … +104 °F): | |
| 0 … 90 %RH | ±1.5 %RH |
| 90 … 100 %RH | ±2.5 %RH |
| At temperature range −40 … 0 °C, +40 … +80 °C (−40 … +32 °F, +104 … +176 °F): | |
| 0 … 90 %RH | ±3.0 %RH |
| 90 … 100 %RH | ±4.0 %RH |
| Factory calibration uncertainty at +20 °C (+68 °F): | |
| 0 … 90 %RH | ±1.1 %RH |
| 90 … 100 %RH | ±1.8 %RH |
| Humidity sensor | HUMICAP® 180R |
| Stability | ±2 %RH over 2 years |
| Temperature | |
| Measurement range | −40 … +80 °C (−40 … +176 °F) |
| Accuracy over temperature range: | |
| +15 … +25 °C (+59 … +77 °F) | ±0.2 °C (±0.36 °F) |
| 0 … +15 °C, +25 … +40 °C (+32 … 59 °F, +77 … +104 °F) | ±0.25 °C (±0.45 °F) |
| −40 … 0 °C, +40 … +80 °C (−40 … +32 °F, +104 … +176 °F) | ±0.4 °C (±0.72 °F) |
| Temperature sensor | Pt1000 RTD 1/3 Class B IEC 751 |
| HMP110 probe | −40 … +80 °C (−40 … +176 °F) |
| Storage temperature | −50 … +70 °C (−58 … +158 °F) |
| Property | Description/Value |
|---|---|
| Resistive temperature input signals | |
| Temperature sensor | Pt100 RTD / 4 wire, Class A IEC 751 |
| Input impedance | 5.1K Ω |
| Measurement range | −196 … +90 °C (−320.8 … +194 °F) |
| Accuracy over temperature range: | |
|
−196 … −90 °C (−320.8 … −130 °F) −90 … −30 °C (−130 … −22 °F) −30 … 0 °C (−22 … +32 °F) 0 … +50 °C (+32 … +122 °F) +50 … +90 °C (+122 … +194 °F) |
±2.5 °C (±4.5 °F) ±0.75 °C (±1.35 °F) ±0.5 °C (±0.9 °F) ±0.25 °C (±0.45 °F) ±0.75 °C (±1.35 °F) |
| Property | Description/Value |
|---|---|
| Current input signals | 0 … 22 mA |
| Resolution | 0.67 μA |
| Accuracy | ±0.15 % F.S. at +25 °C (+77 °F) |
| Input impedance | 62 Ω |
| Overload protection | 40 mA |
| Voltage input signals | 0 … 5 V, 0 … 10 V |
| Resolution | 0.0034 % F.S. |
| Accuracy | ±0.15 % F.S. at +25 °C (+77 °F) |
| Input impedance | 37K Ω |
| Overload protection | 50 V max. |
| Isolation | One common per logger |
| Contact inputs | Open/Closed with magnetic reed switch cable connections (dry contact) |
| Model | Measurement channels |
|---|---|
| HMT141 | 1 temperature and 1 humidity channel |
| HMT143 | 2 RTD temperature channels |
| HMT144 | 2 voltage inputs (0 … 5 VDC) |
| HMT145 | 2 voltage inputs (0 … 10 VDC) |
| HMT146 | 2 current inputs (0 … 20 mA) |
| HMT147 | 2 door contacts |
| HMT148 | 1 RTD temperature and 1 door contact |
| HMT14D | 1 RTD temperature and 1 current input (0 … 20 mA) |
| HMT14E | 1 RTD temperature and 1 voltage input (0 … 5 VDC) |
| HMT14F | 1 RTD temperature and 1 voltage input (0 … 10 VDC) |
| Property | Description/Value |
|---|---|
| Operating temperature | |
| Data logger body, no display | −40 … +60 °C (−40 … +140 °F) |
| Data logger body, with display | −20 … +60 °C (−4 … +140 °F) |
| IP rating | IP65 |
| Maximum operating altitude | 2000 m (6 500 ft) |
| Property | Description/Value |
|---|---|
| Memory | 3,060 samples |
| Sample rate | User selectable (interval: 2 … 60 minutes) |
| Display (optional) |
128 × 64 resolution full graphics B&W display without backlight |
| Property | Description/Value |
|---|---|
| Weight (with battery/without probe) | 300 g (10.6 oz) |
| Screw terminals | 26 AWG … 20 AWG |
| HMP110 probe interface | 4-pin M8 female panel connector |
| HMP110 probe cable lengths | 3 m, 5 m, and 10 m (9.8 ft, 16.4 ft, and 32.8 ft) |
| Hermetic door switch sensor cable length | 7.6 m (24.9 ft) |
| Material | |
| Data logger housing | PBT plastic |
| Display window | PC plastic |
| HMP110 probe body | Stainless steel (AISI 316) |
| HMP110 probe grid filter | Chrome coated ABS plastic |
| RTD temperature sensor | |
| Sensor tip material | Stainless steel (AISI 316) |
| Sensor tip length | 50.8 mm (2 in) |
| Sensor tip diameter | 4.76 mm (0.19 in) |
| Cable length | 5 m (16.4 ft) |
| Property | Description/Value |
|---|---|
| Networking standards | IEEE 802.11b/g |
| Data rates |
802.11b: up to 11 Mbps 802.11g: up to 54 Mbps |
| Frequency band | 2402 ~ 2480 MHz |
| Wi-Fi security | WEP (128-bit), WPA, WPA2 (Personal) |
| Output power | +18 dBm (63 mW) |
| Receiver sensitivity | −85 dBm typical |
| Antenna | Onboard whip |
| Contains | FCC ID: U3O-G2M5477 IC ID: 8169A-G2M5477 NCC ID: CCAF11LP0240T6 
当該機器には電波法に基づく、技術基準適合証明等を受けた特定無線設備を装着している。 |
| Property | Description/Value |
|---|---|
| EMC compatibility 2 |
EN 61326-1 EN 301 489-1 EN 300 328 V2.1.1 |
| Electrical safety | EN 61010-1 |
| Radio transmission equipment type approval | CMIIT ID: 2019DJ5109 |
| Compliance marks | FCC, RCM, ROHS |
|
Region-specific standards and regulations are applied to wireless devices. The HMT140 logger can be used in the following regions/countries. The list is subject to change without prior notice.
|
| Item | Order code |
|---|---|
| HMP110 | |
| Humidity and temperature probe | HMP110 3 |
| Humidity and temperature replacement probe | HMP110R 3 |
| Humidity sensor | Vaisala HUMICAP® 180R |
| Probe mounting flange | 226061 |
| Probe mounting clamps, 10 pcs | 226067 |
| Probe cable 3 m (9.8 ft) | HMT120Z300 |
| Probe cable 5 m (16.4 ft) | HMT120Z500 |
| Probe cable 10 m (32.8 ft) | HMT120Z1000 |
| Duct installation kit | 215619 |
| Sensor protection | |
| Plastic grid filter | DRW010522SP |
| Plastic grid with membrane filter | DRW010525SP |
| Stainless steel sintered filter | HM46670SP |
| Other accessories | |
| RTD temperature probe 5 m (16.4 ft) | ASM210644SP |
| Hermetic door switch sensor kit | 236319SP |
| Thermal dampener blocks | 236310SP |
| Four Dual Lock™ strips (76 mm/3 in) | 237217SP |
1 Incl. non-linearity, hysteresis,
and repeatability.
2 Due to updated regulations (ETSI EN
300 328 V2.2.2a), HMT140 will no longer be available for purchase in the following
countries from Aug. 6th, 2021, onwards: EU countries, Iceland, Liechtenstein,
Turkey, Norway, Switzerland, and the UK. The regulations do not affect devices
already in use.
3 See separate order form.