Passwords - HMT140

HMT140 User Guide

Document code
M211488EN
Revision
J
Language
English
Product
HMT140
Document type
User guide

To improve security, you can require that a user log in to make changes to HMT140 parameters. If Passwords are enabled, a password prompt appears when a user clicks Update on the Setup tab. No other HMT140 functions will require a login password.

CAUTION Use of passwords in HMT140 is not recommended for use with Vaisala viewLinc software. Passwords may limit the ability of viewLinc to update settings or values in the device. For example, changes to a threshold alarm template in viewLinc may not transfer to HMT140 if passwords are required on the device.

To set, change, or remove an HMT140 password:

  1. Open HMT140 Utility.
  2. Connect HMT140 to your computer.
  3. From the Options menu, select Advanced Options.
  4. On the Advanced Options window, check Enable use of passwords in HMT140, then click OK.
  5. To set the password for the first time:
    • Leave the Current Password field blank.
    • Check the Change Password option.
    • Enter the new password in the New Password and New Password Again fields.
    • Click Update.
  6. To change an existing password:
    • Enter the current password.
    • Check the Change Password option.
    • Enter the new password in the New Password and New Password Again fields.
    • Click Update.
  7. To clear a password:
    • Enter the current password.
    • Check the Change Password option, and leave the New Password and New Password Again fields blank.
    • Click Update.
CAUTION Record the password in a safe location for safe-keeping; HMT140 does not save the password. If the password is forgotten, contact Vaisala Technical Support.