| In the MI70 user interface, measurement parameters are referred to as quantities. |
Figure 1. Quantities and units menu
The unit of parameters (Td/f, Td, or T) can be selected between °C or °F. The default is
°C.
-
Open the menu by pressing
Open.
-
Select Display and press .
-
Select Quantities and units and then press .
-
To select a parameter, move on the desired parameter using the arrow buttons and then press
Select.
-
To change the unit, move on the desired parameter using the arrow buttons and then press
Unit.
-
To hide a parameter, move on the desired parameter using the arrow buttons and then press
Hide.
-
To return to the basic display, press
Exit.
-
If you want to check the environment settings, press
Yes. Otherwise press
No.
|
Units °C atm and °F atm indicate that the dew point or frost point is
converted from process pressure to atmospheric pressure.
|