This procedure is one of the alternative options for completing the adjustment described in Temperature adjustment of DMT340 series using DM70. |
- After selecting 1-point adjustment, press Select to continue.
- Set the probe to the reference temperature. You can follow the stabilization from the graphic display by pressing Graph. When the reading has stabilized, press Ready.
- Use the arrow buttons to give the reference temperature value and press OK.
- Confirm the adjustment by pressing Yes. If you press No, you return to the adjustment mode display and no changes are made.
- The adjustment is now complete. Press Back to exit the adjustment mode.
- To return to the basic display, press Exit.