| CAUTION The IP classification of probes is valid only when the probes are connected to the probe connection cable. |
| If your transmitter was delivered with preconfigured analog outputs, make sure that you connect the measurement devices accordingly. |
Probes are connected to Indigo500 series transmitters using a cable. Connections are made to the screw terminals inside the housing. The Indigo520 model allows 2 probes to be connected. After connecting a probe, use the touchscreen interface or the web user interface to configure the transmitter.
- 1
- Probe connection cable for probe 1
- 2
- Probe connection cable for probe 2 (dual-device support in Indigo520)
- 3
- Probe to be connected as probe 2 (GMP252 example)
- 4
- Probe to be connected as probe 1 (HMP7 example)
- 5
- Probe cable connector (M12 5-pin A-coded female)