Property | Description/Value |
---|---|
Dew point | |
Sensor | DRYCAP® 180M |
Measurement range | −70 … +80 °C (−94 … +176 °F) Td/f |
Measurement range for continuous use | −70 … +45 °C (−94 … +113 °F) Td/f |
Accuracy |
Up to ±2 °C (±3.6 °F) Td/f See accuracy graph |
Response time 63 % [90 %] 1 | |
From dry to wet | 5 s [15 s] |
From wet to dry | 45 s [8 min] |
Temperature | |
Measurement range | 0 … +80 °C (+32 … +176 °F) |
Accuracy | ±0.2 °C at room temperature |
Temperature sensor | Pt100 RTD Class F0.1 IEC 60751 |
Relative humidity | |
Measurement range | 0–70 %RH |
Accuracy (RH <10 %RH, at + 20 °C) | ±0.004 %RH + 20% of reading |
Concentration by volume (ppm) | |
Measurement range (typical) | 10–2500 ppm |
Accuracy (at + 20 °C, 1 bar) | 1 ppm + 20% of reading |
Property | Description/Value |
---|---|
Operating temperature for probe head | −40 … +80 °C (−40 … +176 °F) |
Operating temperature for probe body | −40 … +80 °C (−40 … +176 °F) |
Storage temperature |
−40 … +80 °C (−40 … +176 °F) |
Operating pressure for probe head | 0–10 bar (0–145 psi), absolute |
Measurement environment |
For air, nitrogen, hydrogen, argon, helium, oxygen 2, and vacuum |
IP rating for probe body |
IP66: Dust-tight. Protected from powerful water jets from any direction. |
Mechanical durability of probe head |
Up to +180 °C (+356 °F) Up to 10 bar/145 psi, absolute |
Property | Description/Value |
---|---|
Operating voltage | 15–30 V DC |
Current consumption | 10 mA typical, 500 mA max. |
Digital output | RS-485, non-isolated |
Protocols | Modbus RTU |
Property | Description/Value |
---|---|
Connector | M12 5-pin A-coded male |
Weight | 310 g (10.9 oz) with 2-m (6.56-ft) cable |
Probe cable length | 0.15 m (0.49 ft), 2 m (6.56 ft) or 10 m (32.80 ft) |
Materials | |
Probe | AISI 316L |
Probe body | AISI 316L |
Cable jacket | FEP |
1 Tested with
sintered filter.
2
Consult Vaisala if other chemicals are present. Consider safety regulations with flammable gases.