Cooling Set installation example - DMP5 - DMP6 - DMP7 - DMP8 - DMPX
DMP Series User Guide
- Document code
- M212357EN
- Revision
- E
- Language
- English
- Product
- DMP5
- DMP6
- DMP7
- DMP8
- DMPX
- Document type
- User guide
Figure 1. Example installation with Cooling Set
DMP246CS
- 1
- Process chamber, maximum temperature +350 °C (+662 °F)
- 2
- Mineral wool or other insulation, total wall thickness is < 125 mm
(4.92 in) so no lengthening piece is welded to mounting tube
- 3
- Space outside process chamber, in ambient temperature
- 4
- Location of dew point sensor when probe head is installed in the cooling set (under
sintered filter)
- 5
- Tube of the mounting flange welded to inner plate of process wall
- 6
- Cooling set attached to mounting flange using mounting screws (4
pcs)