- 1
- Protection cap (remove before use)
- 2
- 5-pin M12 connector
- 3
- Probe body with type label
- 4
-
Status indicator LED:
- Green
- Power on and probe online, flashes when communicating
- Red
- Error
- Off
- Power off, or indicator disabled
- 5
-
Fixed probe cable, variable length (do not cut).
- 6
- Probe head (DMP7 model shown)
- 7
- Location of sensors on the probe head. DMP series probes have a removable filter over the sensors that can be replaced if it gets dirty or damaged.
- 8
- Protection cap (remove before use)
| To prevent the warming of the indicator LED from causing a slight measurement error, DMP7 with a 0.15‑m (0.49‑ft) probe connection cable keeps the indicator normally off (even when power is on). If the probe is in error state, the red LED is shown. |