| Values of all available output parameters are locked (showing the latest valid value) when sensor purge, autocalibration, or condensation prevention functions are active. |
-
Output parameter is available on this model.
- Output parameter is unavailable during sensor warming unless temperature is written to register 0x0334 from an external source
-
Output parameter is not available on this model.
| Output parameter | Output unit | DMP5 | DMP6 | DMP7 | DMP8 |
|---|---|---|---|---|---|
| Relative humidity | %RH | ||||
| Temperature | °C | ||||
| Dew point temperature | °C | ||||
| Dew/frost point temperature | °C | ||||
| Dew/frost point temperature at 1 atm | °C | ||||
| Dew point temperature at 1 atm | °C | ||||
| Absolute humidity | g/m3 | ||||
| Mixing ratio | g/kg | ||||
| Water concentration | ppmv | ||||
| Water vapor pressure | hPa | ||||
| Water vapor saturation pressure | hPa | ||||
| Enthalpy | kJ/kg | ||||
| Dew point temperature difference | °C | ||||
| Absolute humidity at NTP | g/m3 | ||||
| Water mass fraction | ppmw | ||||
| Diagnostic parameters 1 | |||||
| Sensor saturation ratio (SSR) | % | ||||
| Sensor temperature (Ts) | °C | ||||
1 Selectable as output parameters using the Indigo80
handheld indicator and the Modbus protocol.