Connecting mast tubes - DKP110

DKP110 User Guide
Document code
M211625EN
Revision
H
Language
English
Product
DKP110
Document type
User guide
  • Adjustable wrenches

Connect the mast tubes on the ground or on an appropriate support. Connect the mast tubes towards the tilting direction from the mast base hinge:

  • West in the Northern Hemisphere
  • East in the Southern Hemisphere
  1. Starting from the lowest mast tube, one by one, slide the mast tubes inside one another.
  2. Attach the mast tubes together with the mast body bolts, washers, and nuts. To assist in aligning the bolt holes in the mast tubes, use a conical wedge and a hammer.
  3. Tighten the mast body bolts.
    2
    Mast tube Ø 120×5 mm (4.72×0.20 in), 1000 mm (39.37 in) (1 pc)
    3
    Mast tube Ø 100×5 mm (3.94×0.20 in), 3000 mm (118.11 in) (1 pc)
    4
    Mast tube Ø 80×5 mm (3.15×0.20 in), 3000 mm (118.11 in) (1 pc)
    5
    Mast tube Ø 60×5 mm (2.36×0.20 in), 3000 mm (118.11 in) (1 pc)
    13
    Hex bolt DIN931‑1 M12×140 (2 pcs)
    15
    Hex bolt DIN931‑1 M12×120 (2 pcs)
    16
    Hex bolt DIN931‑1 M12×100 (2 pcs)
    17
    Hex nut DIN934 M12 (8 pcs). Tightening torque 80 Nm.
    19
    Washer DIN125 A 13 (6 pcs)