| Wear protective eyewear, gloves, and a safety helmet.
| To protect your hands, always wear gloves when handling the guy wires.
|WARNING Make sure your clothing and equipment do not get tangled in the
wires or equipment during installation.
In assembling guy wires, you need:
- Guy wire
end for 25 to 68 mm2 wire (3 pcs)
Attach the guy wires with the wedge clamps
to the guy wire foundations.
Connect the U‑bolt to the lifting eye nut that is installed on the concrete
Slide the strap onto the U‑bolt and thread the nuts.
Push the guy wire through the strap and slide the wedge on the guy wire.
Push the wedge to the strap and hammer it in tightly. Check that the wire is
To secure the wedge, tighten the wedge adjustment screw.