Installing foundation bolts - DKP110

DKP110 User Guide

Document code
Document type
User guide
  • Adhesive tape
  • Brush and compressed air or air pump
  • Chemical anchor such as injectable adhesive anchor
  • Drill hammer
  • Hammer
  • Measuring tape
  • Spirit level

To install the bolts, you need:

  • Foundation bolt (4 pcs)
  1. Check that the mast foundation bolt is at the correct height and vertical.
    Make sure that approximately 60 mm (2.36 in) of the foundation bolt is above the surface of the mast foundation.
  2. Make sure that the holes are free of dust, and clean and dry.
  3. Check the instructions of the chemical anchor manufacturer before use.
    The chemical anchor may harden very fast. Work in a coordinated manner and follow the instructions and the given working times.
  4. Fill the holes with chemical anchor.
  5. Place the foundation bolts in the holes, and turn the bolts to make sure the chemical anchor paste spreads evenly.

    Extra paste flows out from the holes.

  6. To push the foundation bolts all the way in, lightly tap the bolts with a hammer.
  7. Check the instructions of the chemical anchor manufacturer for the time it takes for the chemical anchor to set. Leave the chemical anchor to set.