WARNING Be careful when
erecting or lowering the mast. Check that there are no power lines or other
obstacles above the mast or close to the guy wires.
You need to lower the mast, for example,
when equipment installed on the upper assembly needs maintenance.
Place a suitable support below the mast on the side where you are going to lower the
mast.
Disconnect guy wire 1.
Open and remove the locking bolt on the tilting side of the mast.
WARNING Remove only one of
the locking bolts. To prevent the mast from falling down, keep the other locking bolt in
place.
Open and remove the lower hinge bolt.
Loosen the upper hinge bolt nut, so that the mast pole can move between the base hinge sides.