|
Depending on the sensor or device, route the cables along the mast and attach the cables to the mast firmly with cable ties. The recommended distance between the cable ties is 30 … 40 cm (11.81 … 15.75 in).
| CAUTION To avoid damaging the cables when lowering the mast, leave enough slack next to the hinge when routing the cables to the mast base. Protect the cables near the hinge with the provided protective spiral. |
| CAUTION To avoid strain on the connector, make sure you connect the cable properly. Too much strain may cause the cable to fall off, damage the cable or connector, or make the cable or connector susceptible to water leakage. |