The delivery may contain a lifting rod
that is used with the winch to erect and lower the upper mast assembly. The clamps are
preinstalled at the factory to the pedestal tube and to the lowest mast tube. The clamp on the
lifting rod has hooks and taps to ease the installation. The stainless-steel bolts are
included in the lifting rod assembly set.
Place the lifting rod on the mast assembly.
Make sure that both taps on the clamp go into the railing and the hooks at the end of
the clamp go firmly around the opposite clamp.
Install the bolts with the washers and tighten the bolts with an Allen key.