Indigo201 transmitters can be ordered either with the optional display, or as a non-display model that uses an LED indicator for notifications. In the display model, measurements can be viewed in numerical and graph format from the display, and status notification messages are shown on the bottom of the display. In the non-display model, the LED indicator is used to inform about the device status.
You can configure the transmitter display to show 1 to 3 measurement parameters in numeric and graph format. Information about the transmitter and connected probe (for example, notifications and warnings) is shown on a message row on the top part of the display.
Relay and USB connection status are also shown on the display as applicable.
The parameters shown, display brightness, and display mode (numeric or graph) can be configured with the Insight PC software.
Switching between display views and turning display off and on
To switch between different display views, push the left button on the front cover once.
To turn the display off and on, keep the left button pressed down for a few seconds.