Vaisala Insight PC software is a configuration
software for Vaisala Indigo-compatible probes and transmitters. Insight is available for the
Windows operating system (64-bit only). For a full list of supported operating system
versions, see
http://www.vaisala.com/insight.
With the Insight PC software, you can:
- See real-time measurements and device and
status information
- Configure outputs and relays
- Calibrate
and adjust output
- Configure the transmitter settings (for
example, display mode)
- Calibrate and adjust the probe connected to
the transmitter
- Test and adjust the analog
output channels of the transmitter
Indigo200 transmitters can be
connected to Insight PC software with a standard USB-C cable (type C to A or type C to C). For
instructions on connecting the transmitter to Insight, see Connecting to Insight PC software.
| Note that the USB cable connection to Insight is only intended for temporary use during
configuration, and must not be used for permanent installations. The IP rating and EMC
properties of the transmitter can be affected when the USB port is open. |
| To connect the Indigo
transmitter to Vaisala Insight PC software with a USB cable, you must have the Vaisala USB
Device driver installed on your PC. |