You can clean the Indigo transmitter body by wiping it with a moist cloth. Standard cleaning agents can be used.
| Refer to the probe-specific cleaning instructions when cleaning the probe connected to transmitter. Do not spray anything directly on the probe, since that may deposit impurities on the sensor. |
Chemical tolerance
The following chemicals can be used to clean the transmitter:
- H2O2 (6000 ppm), non-condensing
- Alcohol-based cleaning agents such as ethanol and IPA (70 % Isopropyl Alcohol, 30 % water)
- Ca(Clo)2 (calcium hypochlorite) max. 0.5 %
- QAC (quaternary ammonium cations) max. 0.5 %
| Avoid exposing the transmitter to chemicals for unnecessarily long periods of time. Do not immerse it in a chemical, and wipe chemicals off the surfaces after cleaning. |