Opening and mounting - INDIGO200SERIES - INDIGO201

Indigo201 User Guide

Document code
M212842EN
Revision
B
Language
English
Product
INDIGO200SERIES
INDIGO201
Document type
User guide
CAUTION To avoid damaging the connector pins of the transmitter, pull the transmitter cover off the base in a straight angle. Do not twist or bend.
  1. Loosen the 4 screws on the transmitter cover.
  2. Carefully open the transmitter cover part of the way from both sides so it is easier to pull the cover off the base.
  3. Pull the transmitter cover off the base in a straight angle. Do not twist or bend.
  4. Lead the input/output cable inside the transmitter (see Wiring options). If you are wiring through the lead-through on the bottom of the transmitter, test that the strain relief works with your cable.
  5. Place the transmitter base on the installation surface and mount it with 3 screws. See the screw positions in Figure 1.
  6. Connect the input/output cable's wiring to the screw terminals (see Indigo200 transmitter base) and reattach the cover when done.