5‑mm Allen key DKE110FSUP2 is used with frangible 106‑mm (4.17‑in) pole masts (DKE100 masts). Figure 1. DKE110FSUP2 installation accessories 1 Mounting plate (META00253) 2 Mounting kit (APPK‑SET106) 3 Support arm (10391) (2 pcs) 4 Mounting flat (10389) 5 Hex screw M6×16 DIN912 A4 (4 pcs) 6 Spring washer B6 DIN127 A4 (4 pcs) 7 Flat washer A6.4 DIN125 A4 (4 pcs) Attach the mounting kit to the mounting plate. Tightening torque 5 Nm. 1 Mounting plate 2 Flat washer A6 DIN125 (4 pcs) 3 Spring washer A6 DIN127 A4 (4 pcs) 4 Hex screw M6×30 DIN912 (4 pcs) Attach the mounting kit to the pole mast. Tightening torque 5 Nm. 1 Mounting plate 2 Round sleeve spacer M6, D10/6.4 L10, AISI304 (4 pcs) 3 Flat washer A6 DIN125 (4 pcs) 4 Spring washer A6 DIN127 A4 (4 pcs) 5 Hex screw M6×30 DIN912 (4 pcs) 6 Clamp Attach the support arms to each other. Tightening torque 5 Nm. 1 Mounting flat (10389) 2 Hex screw M6×16 DIN912 A4 (4 pcs) 3 Spring washer B6 DIN127 A4 (4 pcs) 4 Flat washer A6.4 DIN125 A4 (4 pcs) Attach the support arms to the mounting plate. Tightening torque 5 Nm. 1 Flat washer A6.4 DIN125 (6 pcs) 2 Spring washer B6 DIN127 (6 pcs) 3 Hex screw M6×16 DIN912 (6 pcs) Use a spirit level to verify that the support arms are level. Figure 2. DKE110FSUP2 installed