Mounting GMP252 on pole mast - BWS500

The U‑bolt is suitable for pole masts with diameter Ø 30–60 mm (1.18–2.36 in).

1. Attach the probe support plate onto the pole support plate with 4 screws. Place the U‑bolt on the pole mast and push the ends of the U‑bolt through the support plates. Tighten the 2 U‑bolt nuts.
2. Mount the radiation shield DTR250 on the probe support plate with 2 screws.
3. Insert the GMP252 probe through the threaded gland.
4. Insert the probe into the radiation shield. Tighten the threaded gland.
5. Connect the cable.