Mount WXT530 series transmitter on top of the pole mast. If you mount the transmitter on a Ø 60 mm (2.36 in) pole mast, use an additional mounting adapter.
| Keep the upper part of the protective cushion on during the installation. |
- Lead the sensor cable through the mounting kit, and for 60‑mm (2.36 in) masts, also through the mounting adapter.
- Connect and tighten the cable.
- Insert the mounting kit adapter and turn it firmly until you feel the adapter snap into the locked position.
- Run the sensor cable through the mounting adapter. Attach the sensor to the mounting adapter or mast. Tighten the mounting adapter with wrench.
- Align the sensor so that the arrow points to north.
- Tighten the fixing screw to keep the sensor firmly in place. Remove the protective cushion.