Depending on the selected sensors and options, the following tools and equipment may be needed in the installation:
- 5‑mm Allen key
- 5‑mm flat head screwdriver or a Pozidriv screwdriver (PZ2)
- 7‑mm socket wrench or flat head screwdriver
- 10‑mm wrench
- Spirit level
- Laser distance meter with incline measurement capability
- Laptop
-
Ceramic or Teflon paste
To prevent corrosion, oxidation, and seizing, use a non‑conductive, non‑water‑soluble, non‑silicone‑based grease, such as ceramic or Teflon paste, between different kinds of metal.
If you are installing sensors that are not new, you may need to clean them before calibration. For cleaning, you need the following:
- Soft, lint-free cloth
- 50 % isopropyl alcohol